Metra Electronics Automobile Accessories 95 9012 User Manual

INSTALLATION INSTRUCTIONS FOR PART 95-9012

APPLICATIONS

•GOLF 1999-2006

•GTI 1999-2005

•JETTA 1999-2005

(Excluding NEW JETTA 2005)

•PASSAT 2000-2005

95-9012

KIT FEATURES

• Double DIN Head Unit Provision

• Stacked ISO DIN Head Unit Provision

KIT COMPONENTS

A) Radio Housing • B) (8) Phillips screws

WIRING AND ANTENNA CONNECTIONS (Sold Separately)

• 70-1784 VW harness 1998-2001

• XSVI-9003-NAV VW Interface 2003-up

Antenna adapter:

• 40-EU55-adapter for amplified antenna 2002-up

• 40-VW53 adapter for amplified antenna 1998-01

TOOLS REQUIRED:

• Small Flat Blade Screwdriver • Panel Removal Tool

• 86-9001 Radio Removal Tools (2 sets)

1-800-221-0932

www.metraonline.com

95-9012 DASH DISASSEMBLY

•GOLF 1999-2006 •GTI 1999-2005

•JETTA 1999-2005

(Excluding NEW JETTA 2005)

•PASSAT 2000-2005

Disconnect the negative battery

terminal to prevent an accidental

short circuit.

Insert the long ends of the 86-9001

into the slots on the factory radio and

pull out to remove. Note: Flat edge

of key should point outward.

(Figure A)

For single DIN radios with the pocket,

remove the radio and pocket, then

pull out on the plastic tray separating

the dash cavity. (Figure B)

Continue to kit assembly.

Note: This installation kit is an extremely tight fit and requires force to be

“snapped” into the dash opening. Removal of aftermarket radio is even

more difficult than installation, so please be sure to fully test the after-

market radio prior to completing the kit’s installation.

95-9012 KIT ASSEMBLY/ FINAL ASSEMBLY

DOUBLE DIN HEAD UNIT PROVISION/

ISO STACKED HEAD UNIT PROVISION

Slide the DDIN radio unit into the

DDIN bracket/radio housing assembly

and secure the unit to the kit using

the (8) Phillips screws supplied with

the kit. (Figure A)

Locate the factory wiring harness in

the dash. Metra recommends using

the proper mating adapter from Metra

or AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

Snap kit/ radio assembly into the