Dimplex Fan LBN20 User Manual

Installation and Operating Instructions  
Longbourn Model No. LBN20  
Incorporating 2Kw fan heater  
Issue 2 4/2/05  
127  
173  
67  
521  
620  
540  
Fig. 1  
Screws for  
removing  
grate  
Important Safety Advice  
IMPORTANT  
THESE INSTRUCTIONS SHOULD BE READ  
CAREFULLY AND RETAINED FOR FUTURE  
REFERENCE.  
When using electrical appliances, basic precautions should  
always be followed to reduce the risk of fire, electric shock,  
and injury to persons, including the following:  
General  
If the appliance is damaged, check immediately with the  
supplier before installation and operation.  
DO NOT use outdoors.  
Unpack the heater carefully and retain the packaging  
for possible future use, in the event of moving or  
returning the fire to your supplier. Loose coals are  
packed separately within the carton. When the heater  
is assembled the coals are placed on top off the fuel  
bed.  
DO NOT use in the immediate surroundings of a bath  
shower or swimming pool.  
DO NOT locate the heater immediately below a fixed  
socket outlet or connection box.  
DO NOT COVER THE HEATER. Do not place material  
or garments on the heater, or obstruct the air circulation  
around the heater, for instance by curtains or furniture,  
as this could cause overheating and a fire risk.  
DO NOT leave young children, the elderly, or the infirm  
unsupervised in the vicinity of the heater.  
The heaters is designed for use inset into a 407mm  
(16”) or 457mm (18”) wide by 559mm (22”) high  
fireplace opening see also section “Installation in a fire  
place opening”.  
A 2kw fan heater discreetly positioned in the canopy of  
the fire provides heating in cold weather. Switching  
allows half or full heat.  
DO NOT use this heater in series with thermal control, a  
programmable controller, a timer or any other device  
that switches the heater automatically, since a fire risk  
exists when the heater is accidentally covered or  
displaced. Ensure that furniture, curtains or other  
combustible material are positioned NO closer than  
1meter from the heater.  
A minimum distance of 1 metre (39”) must be  
maintained between the front of the heater and any  
surrounding furniture, overhanging curtains or other  
obstructions.  
Before connecting the heater check that the supply  
voltage is the same as that stated on the heater.  
In the event of a fault unplug the heater.  
Unplug the heater when not required for long periods.  
Keep supply cord away from the front of the heater.  
Although this heater complies with safety standards, we  
do not recommend its use on deep pile carpets or on  
long hair type of rugs.  
Electrical  
Warning: This appliance must be earthed  
This heater must be used on an (AC) supply  
only and the voltage marked on the heater must  
correspond with the supply voltage.  
For your convenience, the heater is fitted with a  
rewireable plug incorporating a 13 amp fuse.  
In the event of replacing the fuse in the plug  
supplied, a 13 amp fuse approved by ASTA to BS  
1362 must be used.  
The appliance must be positioned so that the plug is  
accessible.  
If the supply cord is damaged it must be replaced by the  
manufacturer or service agent or a similarly qualified  
person in order to avoid a hazard.  
 

Closet Maid Indoor Furnishings SO2DDW User Manual
Continental Burner CP43309 User Manual
Continental Electric Coffeemaker CP43659 User Manual
Cub Cadet Lawn Mower LTX1050 KW User Manual
Cuisinart Food Processor Cuisinart Mini Prep Plus Processor User Manual
Elation Professional Baby Accessories MH W User Manual
ETI Sound Systems INC Portable Speaker Matrix 1000 V2 User Manual
First Alert Home Security System FA1220CV User Manual
FUNAI VCR BZV420MW8 User Manual
Gillette Electric Shaver 350CC User Manual