Clarion CD Player CZ509 User Manual

Owner’s manual  
Mode d’emploi  
Manual de instrucciones  
CZ509  
Bluetooth® CD/USB/MP3/WMA/AAC RECEIVER WITH  
CeNET CONTROL  
LECTEUR CD/USB/MP3/WMA/AAC Bluetooth® AVEC  
COMMANDE CeNET  
RECEPTOR DE CD/USB/MP3/WMA/AAC Bluetooth®  
CON CONTROL CeNET  
 
Thank you for purchasing this Clarion product.  
Please read this owner’s manual in its entirety before operating this equipment.  
Check the contents of the enclosed warranty card and keep it carefully with this manual.  
Contents  
1. FEATURES...................................................................................................................................... 3  
2. PRECAUTIONS ............................................................................................................................... 4  
3. CONTROLS ..................................................................................................................................... 6  
Names of the Buttons and Their Main Functions ............................................................................. 6  
4. DCP.................................................................................................................................................. 8  
5. REMOTE CONTROL ....................................................................................................................... 9  
Functions of Remote Control Unit Buttons....................................................................................... 9  
Inserting the Battery ....................................................................................................................... 10  
6. OPERATIONS................................................................................................................................ 11  
Basic Operations............................................................................................................................ 11  
Radio Operations ........................................................................................................................... 14  
CD/MP3/WMA/AAC Operations..................................................................................................... 15  
Bluetooth Operations...................................................................................................................... 19  
Operations Common to Each Mode............................................................................................... 23  
7. ACCESSORIES ............................................................................................................................. 26  
USB/MTP Operations..................................................................................................................... 26  
iPod Operations.............................................................................................................................. 28  
Satellite Radio Operations.............................................................................................................. 31  
CD Changer Operations................................................................................................................. 33  
8. TROUBLESHOOTING................................................................................................................... 34  
9. ERROR DISPLAYS ....................................................................................................................... 36  
10. SPECIFICATIONS ......................................................................................................................... 37  
11. OTHERS ........................................................................................................................................ 38  
1. FEATURES  
• Built in Bluetooth® Hnadsfree (HFP) and Audio Streaming (A2DP & AVRCP)  
• BBE MP for compressed audio improvement  
• BEAT EQ for Sound Adjustment  
CZ509  
3
 
2. PRECAUTIONS  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
CAUTION  
USE OF CONTROLS, ADJUSTMENTS, OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED HEREIN, MAY  
RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
These limits are designed to provide reasonable  
protection against harmful interference in a  
residential installation.  
This equipment generates, uses, and can  
radiate radio frequency energy and, if not  
installed and used in accordance with the  
instructions, may cause harmful interference to  
radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation.  
THE COMPACT DISC PLAYER SHOULD NOT  
BE ADJUSTED OR REPAIRED BY ANYONE  
EXCEPT PROPERLY QUALIFIED SERVICE  
PERSONNEL.  
CHANGES OR MODIFICATIONS NOT  
EXPRESSLY APPROVED BY THE  
MANUFACTURER FOR COMPLIANCE  
COULD VOID THE USER’S AUTHORITY TO  
OPERATE THE EQUIPMENT.  
If this equipment does cause harmful  
interference to radio reception, which can be  
determined by turning the equipment off and on,  
the user is encouraged to consult the dealer or  
an experienced radio technician for help.  
INFORMATION FOR USERS:  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE  
MANUFACTURER WILL VOID THE  
WARRANTY AND WILL VIOLATE FCC  
APPROVAL.  
Bottom View of Source Unit  
4
CZ509  
 
Flip Down Panel  
This unit uses a flip-down structure that makes  
possible large-size displays.  
Handling Compact Discs  
• Compared to ordinary music CDs, CD-R and  
CD-RW discs are both easily affected by high  
temperature and humidity and some of CD-R  
and CD-RW discs may not be played.  
Therefore, do not leave them for a long time  
in the car.  
CAUTION  
When opening and closing the FLIP DOWN  
PANEL, be careful not to catch your fingers.  
They could be injured.  
1. Always use this unit with the FLIP DOWN  
PANEL closed.  
Never stick labels on the surface of the  
compact disc or mark the surface with a  
pencil or pen.  
2. Do not force operations or use this device  
abnormally when opening or closing the FLIP  
DOWN PANEL.  
Display Screen  
In extreme cold, the screen movement may slow  
down and the screen may darken, but this is  
normal.  
3. Do not use the FLIP DOWN PANEL as a tray  
to place objects on when it is open.  
The screen will recover when it returns to  
normal temperature.  
4. When closing the FLIP DOWN PANEL, do  
not press the [OPEN] button.  
Press the center of the DCP to close.  
DCP  
5. Strong impacts to the operating or display  
section can cause damage or deformation.  
6. If the FLIP DOWN PANEL does not open  
fully, gently open it with your hand.  
CZ509  
5
 
3. CONTROLS  
Names of the Buttons and Their Main Functions  
[
]
[
]
[
]
BND  
DISP  
OPEN  
[IR RECEIVER]  
[
]
AUX  
[
]
[
]
SRC  
[
]
ISR  
[
]
SOUND  
[
]
SCN  
[
[
]
ROTARY  
]
RPT  
[
], [  
]
[
]
RDM  
[
]
DIRECT  
With the FLIP DOWN PANEL opened  
[Q] (EJECT)  
[CD SLOT]  
[OPEN] button  
[DIRECT] buttons  
• Store radio stations in memory or recall it  
directly while in radio mode.  
Deeply push in [OPEN] button to unlock the flip  
down panel.  
[DISP] button  
• Switch the display indication.  
[RDM] button  
• Perform random play while in CD/MP3/WMA/  
AAC/USB/iPod mode.  
[BND] button  
• Change bands, or select seek tuning or  
manual tuning while in the radio mode.  
[RPT] button  
• Perform repeat play while in CD/MP3/WMA/  
AAC/USB/iPod mode.  
[IR RECEIVER]  
• Receiver for remote control unit.  
(Operating range: 30° in all directions)  
[SCN] button  
• Perform scan play for 10 seconds of each  
track while in CD/MP3/WMA/AAC/USB mode.  
[AUX] input jack  
• Input jack for connecting external device.  
[
] (UP), [ ] (DN) buttons  
• Select folders while in MP3/WMA/AAC/USB  
mode.  
[SOUND] button  
Press to switch to the sound adjust mode.  
6
CZ509  
 
Names of the Buttons and Their Main Functions  
[ROTARY] knob  
• Rotate to adjust the volume.  
[ISR] button  
• Recall ISR radio station in memory.  
• Press and hold the button (2 sec.) to store  
current station into ISR memory (radio mode  
only).  
[SRC] button  
• Turn the power on/off.  
[x], [v] buttons  
• Commence fast-forward or fast-reverse  
mode.  
[
] button  
• Perform preset scan while in the radio mode.  
• Play or pause a track while in CD/MP3/WMA/  
AAC/USB/iPod mode.  
[Q] (EJECT) button  
• Press to eject disc.  
[CD SLOT]  
• Insert CDs here.  
CZ509  
7
 
4. DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it in  
the DCP (DETACHABLE CONTROL PANEL)  
case to prevent scratches.  
2. Insert the left side of the DCP into the main  
unit.  
2.  
We recommend taking the DCP with you when  
leaving the car.  
Removing the DCP  
1. Press the [SRC] button (1 sec.) to turn off the  
power.  
DCP  
1.  
2. Deeply push in [OPEN] button to unlock the  
flip down panel.  
Storing the DCP in the DCP Case  
If the flip down panel does not open fully,  
gently open it with your hand.  
Hold the DCP, in the orientation as shown in the  
figure below, and put it into the supplied DCP  
case. (Ensure the DCP is in the correct  
orientation.)  
[
] button  
OPEN  
DCP  
DCP  
3. Pull the DCP toward you and remove it.  
DCP case  
CAUTION  
DCP  
• The DCP can easily be damaged by  
shocks. After removing it, be careful not to  
drop it or subject it to strong shocks.  
• If the FLIP DOWN PANEL is kept open, the  
DCP may drop due to vibration of the car.  
This results in damage to the DCP. So  
close the FLIP DOWN PANEL or remove  
the DCP to store into the case.  
4. Close the HOLD FLAP.  
• The connector connecting the source unit  
and the DCP is an extremely important  
part. Be careful not to damage it by  
pressing on it with fingernails,  
screwdrivers, etc.  
HOLD FLAP  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
CAUTION  
Be sure to close the HOLD FLAP for safety  
when removing the DCP.  
Attaching the DCP  
1. Insert the right side of the DCP into the main  
unit.  
8
CZ509  
 
5. REMOTE CONTROL  
Functions of Remote Control Unit Buttons  
Some buttons on the remote control unit have different functions from the corresponding buttons on the main  
unit.  
Radio/Satellite Radio modes  
Signal transmitter  
[BND] button  
• Switches reception band.  
[x], [v] buttons  
• Moves preset channels up and down.  
[
]
[
]
SRC  
BND  
[SCN] button  
• Press to perform preset scan.  
• Press and hold the button (2 sec.) to perform  
auto store.  
• In the Satellite Radio mode, press once to  
perform category scan; hold depressed  
(1 sec.) to perform preset scan.  
[
]
]
[
]
MUTE  
DISP  
[
ISR  
[
[
]
RDM  
]
RPT  
[
]
SCN  
CD/MP3/WMA/AAC and USB/MTP  
modes  
[BND] button  
• Press to play the first track.  
[x], [v] buttons  
• Press to select tracks.  
• Press and hold the button (1 sec.) to perform  
fast-forward/fast-reverse (Except DRM file).  
Shared modes  
[SRC] button  
• Press the button to turn on the power.  
Press and hold the button (1 sec.) to turn off  
[
] button  
the power.  
• Switches between playback and pause.  
• Use to alternate operation mode among the  
various modes.  
[SCN] button  
• Press to perform scan play.  
[w], [z] buttons  
When in MP3/WMA/AAC and USB/MTP  
modes, press and hold the button (1 sec.) to  
perform folder scan play.  
• Increases and decreases volume.  
[MUTE] button  
• Turns mute function on and off.  
[ISR] button  
• Recalls ISR radio station stored in memory.  
• Press and hold the button (2 sec.) to store  
current station in ISR memory (radio mode  
only).  
[DISP] button  
• Press to select the desired display.  
[RPT] button  
• Press to perform repeat play.  
When in MP3/WMA/AAC and USB/MTP  
modes, press and hold the button (1 sec.) to  
perform folder repeat play.  
[RDM] button  
• Press to perform random play.  
When in MP3/WMA/AAC and USB/MTP  
modes, press and hold the button (1 sec.) to  
perform folder random play.  
CZ509  
9
 
Functions of Remote Control Unit Buttons  
[RDM] button  
• Press to perform random play.  
• Press and hold the button (1 sec.) to perform  
disc random play.  
CD changer mode  
[BND] button  
Press to switch to next disc in ascending order.  
[x], [v] buttons  
• Press to move the tracks up and down.  
iPod mode  
• Press and hold the button (1 sec.) to perform  
fast-forward/fast-backward.  
[x], [v] buttons  
• Press to move the tracks up and down.  
[
] button  
• Press and hold the button (1 sec.) to perform  
fast-forward/fast-reverse.  
• Switches between playback and pause.  
[SCN] button  
• Press to perform scan play.  
• Press and hold the button (1 sec.) to perform  
disc scan play.  
[RPT] button  
• Press to perform repeat play.  
• Press and hold the button (1 sec.) to perform  
disc repeat play.  
[
] button  
• Switches between playback and pause.  
[RPT] button  
• Press to perform repeat play.  
[RDM] button  
• Press to perform random play.  
• Press and hold the button (1 sec.) to perform  
all random play.  
Inserting the Battery  
Notes:  
1 Turn over the remote control unit and slide  
the cover in the direction indicated by the  
arrow in the illustration.  
Misuse may result in rupture of the battery,  
producing leakage of fluid and resulting in  
personal injury or damage to surrounding  
materials. Always follow these safety precautions:  
• Use only the designated battery.  
• When replacing the battery, insert properly, with  
+/– polarities oriented correctly.  
• Do not subject battery to heat, or dispose of in  
fire or water. Do not attempt to disassemble the  
battery.  
2 Insert the battery (CR2025) into the insertion  
guides, with the printed side (+) facing  
upwards.  
3 Press the battery in the direction indicated by  
the arrow so that it slides into the  
compartment.  
4 Replace the cover and slide in until it clicks  
into place.  
• Dispose of used batteries properly.  
Insertion guide  
10  
CZ509  
 
6. OPERATIONS  
Note:  
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 6.  
Basic Operations  
Switching the display  
Press the [DISP] button to select the desired  
CAUTION  
Be sure to lower the volume before  
switching off the unit power or the ignition  
key. The unit remembers its last volume  
setting.  
display.  
Sound Adjustment  
You can adjust a sound effect or tone quality to  
your preference.  
Turning on/off the power  
Note:  
1. Press the [SRC] button to turn on the power.  
To change sound setting  
1. Press the [SOUND] button to switch to the  
sound adjustment selection display.  
2. Press and hold the [SRC] button (1 sec.) to  
turn off the power for the unit.  
The factory default sound setting is “BEAT  
EQ”.  
2. Then press the [x] or [v] button to  
select the sound adjustment mode.  
Note:  
• System check  
The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power  
is turned on, the “SYSTEM CHECK” appears in  
the display, then the unit returns to the clock  
display mode. The system check starts within the  
unit. Then press the [SRC] button again, the unit  
turn to the radio mode.  
Each time you press the [x] or [v]  
button, the sound adjustment mode  
changes as following order:  
BEAT EQM-B EXBALANCE↔  
FADERLPFS-W VOLHPF”  
In the case of display blinking “ENT”, you  
can press the [ ] button to adjust the  
setting value.  
Selecting a mode  
1. Press the [SRC] button to change the  
3. Press the [ ] or [ ] button to adjust the  
selected audio mode.  
operation mode.  
2. Each time you press the [SRC] button, the  
operation mode changes in the following  
order:  
4. After completing settings, press the  
[SOUND] button to return to the previous  
mode.  
Radio (Satellite radio) CD/MP3/WMA/  
AAC USB/MTP/iPod BLUETOOTH ➜  
(CD changer) AUX Radio...  
External equipment not connected with  
CeNET is not displayed.  
Setting the BEAT EQ  
This unit is provided with 4 types of sound tone  
effects stored in memory.  
iPod/MTP can connect to this unit via USB  
cable.  
Select the one you prefer.  
The factory default setting is “OFF”.  
2-1. Select BEAT EQ.  
Adjusting the volume  
1. Turning the [ROTARY] knob clockwise  
increases the volume; turning it  
counterclockwise decreases the volume.  
The volume level is from 0 (minimum) to 33  
(maximum).  
CZ509  
11  
 
Basic Operations  
BASS<Q>:The factory default setting is “1”.  
(Adjustment range: 0.7/1/1.4/2)  
3-1. Each time you press the [ ] or [  
]
button, the tone effect changes in the  
following order:  
MID<G> : The factory default setting is “0”.  
(Adjustment range: +7 to -7)  
CUSTOMEXCITEIMPACT↔  
B-BOOSTOFF”  
MID<F>  
:
The factory default setting is “500”.  
(Adjustment range: 500/1K/2K)  
CUSTOM : user custom  
MID<Q> : The factory default setting is 1”  
(Adjustment range: 0.7/1/1.4/2)  
TREBLE<G> The factory default setting is  
(Adjustment range: +7 to -7)  
TREBLE<F>:The factory default setting is  
10K”.  
(Adjustment range: 5K/10K/15K)  
The factory default setting is  
.
EXCITE : bass and treble emphasized  
mid emphasized  
:
0  
.
IMPACT : bass and treble emphasized  
B-BOOST : bass emphasized  
OFF  
: no sound effect  
When “CUSTOM” is set:  
3-1. Press the [ ] button.  
TREBLE<Q>  
:
1”  
.
3-2. Press the [x] or [v] button to select the  
BASS, MID” or “TREBLE” mode to adjust.  
(Adjustment range: 0.7/1/1.4/2)  
3-4. Press the [ ] button to return to the  
previous mode.  
3-3. If you want to set the flat, press the [  
]
button to return to the “CUSTOM” mode,  
Setting the MAGNA BASS EXTEND  
The MAGNA BASS EXTEND does not adjust  
the low frequencies like the normal sound  
adjustment function, but emphasizes the deep  
bass frequencies to provide you with a dynamic  
sound.  
The factory default setting is “OFF” (off).  
2-1. Select “M-B EX”.  
3-1. Press [ ] or [ ] button to select “ON” or  
OFF”.  
then press and hold the [ ] button for  
1second or longer, bass/mid/treble  
characteristics become flat.  
When “EXCITE/IMPACT/B-BOOST” is set:  
3-1. Press the [ ] button.  
3-2. Press the [ ] or [ ] button to adjust the  
setting in the range of 3 to +3.  
The factory default setting is “0”.  
3-3. Press the [ ] button to return to the  
previous mode.  
Adjusting the balance  
2-1. Select “BALANCE”.  
3-1. Press the [ ] or [ ] button to adjust the  
balance of the right and left speakers.  
Adjusting the BASS/MID/TREBLE  
This adjustment can be performed only when  
the BEAT EQ is set to “CUSTOM”.  
Note:  
The factory default setting is “CENTER”  
(center). (Adjustment range: RIGHT12 to  
LEFT12 (right 12 to left 12))  
• While connected with the external amplifers,  
please do not set the “BASS/MID/TREBLE” in  
the maximum level. Otherwise the speakers may  
be damaged.  
Adjusting the fader  
2-1. Select “FADER”.  
3-1. Press the [ ] or [ ] button to adjust the  
balance of the rear and front speakers.  
3-1. Press the [ ] button.  
3-2. Press the [x] or [v] button to select as  
following order.  
BASS<G>BASS<F>↔  
The factory default setting is “CENTER”  
(center). (Adjustment range: FRONT12 to  
REAR12 (front 12 to rear 12))  
BASS<Q>MID<G>MID<F>↔  
MID<Q>TREBLE<G>↔  
TREBLE<F>TREBLE<Q>”  
Setting the subwoofer  
You can set the low pass filter of subwoofer.  
2-1. Select “LPF”.  
The factory default setting is “BASS G”.  
3-3. Press the [ ] or [ ] button to select the  
setting.  
3-1. Each time press the [ ] or [ ] button to  
select the setting, the setting changes in  
the following order:  
BASS<G>:The factory default setting is “0”.  
(Adjustment range: +7 to 7)  
BASS<F>:The factory default setting is “50”.  
(Adjustment range: 50/100/200)  
THROUGH6090120”  
12  
CZ509  
 
Basic Operations  
The factory default setting is THROUGH”.  
Setting the BBE MP  
(Sound Enhancement and  
Restoration for compressed audio  
files)  
Adjusting the subwoofer output  
volume  
You can adjust the volume output from the unit’s  
subwoofer output terminal.  
BBE MP (Minimized Polynomial Non-Linear  
Saturation) Process improves digitally  
2-1. Select “S-W VOL”.  
compressed sound, such as MP3, by restoring  
and enhancing the harmonics lost through  
compression. BBE MP works by regenerating  
harmonics from the source material, effectively  
recovering warmth, detail and nuance.  
3-1. Press the [ ] or [ ] button to increases  
or decreases the subwoofer volume.  
The factory default setting is 0”.  
(Adjustment range: +6 to –6)  
Adjusting the high pass filter  
2-1. Select “HPF”.  
3-1. Each time you press the [ ] or [  
button to select the setting.  
This fuction is effective for the audio files in the  
CD/MP3/WMA/AAC or USB/iPod mode, but it is  
ineffective for the video in the USB/iPod mode.  
]
1. Press the [SOUND] button to switch to the  
sound adjustment selection display.  
The setting changes in the following order:  
THROUGH6090120”  
The factory default setting is “THROUGH”  
(through).  
2. Press the [x] or [v] button to select  
BBE MP”.  
3. Press the [ ] or [ ] button to select “ON”  
or “OFF”.  
The factory default setting is “OFF”.  
4. When you select “ON”, press the [ ] button,  
then press the [ ] or [ ] button to select  
as following order.  
LOW MID HIGH  
Notes:  
• Manufactured under license from BBE Sound,  
Inc.  
• Licensed by BBE Sound, Inc. under one or more  
of the following US patents: 5510752, 5736897.  
BBE and BBE symbol are registered trademarks  
of BBE Sound, Inc.  
• During SOUND adjustment mode, if no operation  
is performed for more than 10 seconds, this  
mode can be cancelled and return to previous  
mode.  
CZ509  
13  
 
Radio Operations  
Listening to the radio  
1. Press the [SRC] button and select the radio  
Auto store  
Auto store is a function for storing up to 6  
stations that are automatically tuned in  
sequentially. If 6 receivable stations cannot be  
received, a previously stored station remains  
unoverwritten at the memory position.  
mode.  
2. Press the [BND] button and select the radio  
band. Each time the button is pressed, the  
radio reception band changes in the  
following order:  
1. Press the [BND] button and select the  
desired band (FM or AM).  
FM1 FM2 FM3 AM FM1...  
2. Press and hold the [ ] button for 2 seconds  
or longer. The stations with good reception  
are stored automatically to the preset  
channels.  
Tuning  
There are 3 types of tuning mode available,  
seek tuning, manual tuning and preset tuning.  
If auto store is performed in the FM bands, the  
stations are stored in FM3 even if FM1 or FM2  
was chosen for storing stations.  
Seek tuning  
1. Press the [BND] button and select the  
desired band (FM or AM).  
Preset scan  
If “MANU” is lit in the display, press and hold  
the [BND] button (1 sec.). “MANU” in the  
display goes off and seek tuning is now  
available.  
Preset scan receives the stations stored in  
preset memory in order. This function is useful  
when searching for a desired station in memory.  
1. Press the [ ] button.  
2. Press the [x] or [v] button to  
automatically seek a station.  
2. When a desired station is tuned in, press the  
[
] button again to continue receiving that  
station.  
Note:  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
• Be careful not to press and hold the [ ] button  
(2 sec.), otherwise the auto store function is  
engaged and the unit starts storing stations.  
Quick tuning  
Press and hold the [x] or [v] button (1 sec.)  
to tune in a station.  
Instant station recall (ISR)  
Step tuning  
Instant station recall is a special radio preset  
that instantly accesses a favorite radio station at  
a touch of a button. The ISR function even  
operates with the unit in other modes.  
Press the [x] or [v] button to manually tune  
in a station.  
ISR memory  
Recalling a preset station  
1. Select the station that you wish to store in  
ISR memory.  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exists to store individual radio  
stations in memory. Press the corresponding  
2. Press and hold the [ISR] button (2 sec.).  
Recalling a station with ISR  
[DIRECT] button or the [ ] / [ ] button to  
recall the stored radio frequency automatically.  
In any mode, press the [ISR] button to turn on  
the radio function and tune the selected radio  
station. “ISR” appears in the display. Press the  
[ISR] button again to return to the previous  
mode.  
Manual memory  
1. Select the desired station with seek tuning or  
manual tuning.  
2. Press and hold one of the [DIRECT] buttons  
(2 sec.) to store the current station into  
preset memory.  
14  
CZ509  
 
CD/MP3/WMA/AAC Operations  
2. The folder name and file name can be  
displayed as the title during MP3/WMA/AAC  
play but the title must be within 64 single  
byte alphabetical letters and numerals  
(including an extension).  
MP3/WMA/AAC  
This unit can play back MP3/WMA/AAC files.  
Notes:  
• If you play a file with DRM (Digital Rights  
Management) for WMA remaining ON, no audio  
is output (The WMA indicator blinks).  
• Windows Media™, and the Windows® logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States and/or  
other countries.  
3. Do not affix a name to a file inside a folder  
having the same name.  
Folder structure  
1. A disc with a folder having more than 8  
hierarchical levels will be impossible.  
To disable DRM (Digital Rights  
Management)  
Number of files or folders  
1. Up to 255 files can be recognized per folder.  
Up to 510 files can be played.  
1. When using Windows Media Player 9/10/11,  
click on TOOL OPTIONS MUSIC  
RECORD tab, then under Recording  
settings, unclick the Check box for RECORD  
PROTECTED MUSIC. Then, reconstruct  
files.  
2. Tracks are played in the order that they were  
recorded onto a disc. (Tracks might not  
always be played in the order displayed on  
the PC.)  
3. Some noise may occur depending on the  
type of encoder software used while  
recording.  
Personally constructed WMA files are used  
at your own responsibility.  
Precautions when creating MP3/  
WMA/AAC file  
Set the type of file to be played  
(multi-session function)  
Usable sampling rates and bit rates  
1. MP3: Sampling rate 8 kHz-48 kHz,  
Bit rate 8 kbps-320 kbps / VBR  
2. WMA: Bit rate 8 kbps-320 kbps  
3. AAC: Sampling rate 8 kHz-48 kHz,  
Bit rate 8 kbps-320 kbps / VBR  
When a single disc holds both normal CD type  
tracks and MP3/WMA/AAC type tracks, use this  
command to select which type of track to play.  
Default setting is “CD”.  
When only one type of track (either music CD  
or MP3/WMA/AAC) is recorded on a disc,  
selecting either type will allow playback of the  
disc.  
File extensions  
1. Always add a file extension “.MP3”, “.WMA”  
or “.M4A” to MP3, WMA or AAC file by using  
single byte letters. If you add a file extension  
other than specified or forget to add the file  
extension, the file cannot be played.  
When playing CCCD (copy-control CDs), set  
to CD type.  
1. Press and hold the [DISP] button for 1  
second or longer.  
2. Press the [x] or [v] button to select  
M-SESS”.  
2. Files without MP3/WMA/AAC data will not  
play. The files will be played soundlessly if  
you attempt to play files without MP3/WMA/  
AAC data.  
3. Press the [ ] or [ ] button to select the  
CD” or “MP3”.  
CD”  
When VBR files are played, the play time  
display may differ the play location.  
When playing music CD only.  
When MP3/WMA/AAC files are played, a little  
no sound part is caused between tunes.  
MP3”  
When playing music MP3/WMA/AAC only.  
Logical format (File system)  
4. When setting is completed, remove the disc  
1. When writing MP3/WMA/AAC file on a CD-R  
disc or CD-RW disc, please select “ISO9660  
level 1, 2 or JOLIET or Romeo” or APPLE  
ISO as the writing software format. Normal  
play may not be possible if the disc is  
recorded on another format.  
and reinsert it.  
CZ509  
15  
 
CD/MP3/WMA/AAC Operations  
Disc-In-Play function  
As long as the ignition key is turned to the ON or  
ACC position, this function allows you to turn the  
power to the unit and start playing the disc  
automatically when the disc is inserted even if  
the power is not turned on.  
Loading a CD  
1. Press the [OPEN] button to access the CD  
SLOT behind the FLIP DOWN PANEL.  
2. Insert a CD into the center of the CD SLOT  
with the labeled side facing up. “LOADING”  
appears in the display, the CD enters into the  
slot, and the play starts.  
CAUTION  
Notes:  
• Do not try to put your hand or fingers in  
the disc insertion slot. Also never insert  
foreign objects into the slot.  
• Never insert foreign objects into the CD SLOT.  
• If the CD is not inserted easily, there may be  
another CD in the mechanism or the unit may  
require service.  
• Do not insert discs where adhesive comes  
out from cellophane tape or a rental CD  
label, or discs with marks where  
• Discs not bearing the  
or  
mark and  
CD-ROMs cannot be played by this unit.  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
cellophane tape or rental CD labels were  
removed. It may be impossible to extract  
these discs from the unit and they may  
cause the unit to break down.  
3. Close the FLIP DOWN PANEL.  
Press the center of the DCP to close.  
CAUTION  
Backup Eject function  
Be careful not to catch your hand or fingers  
while closing the FLIP DOWN PANEL.  
Just pressing the [Q] button, ejects the disc  
even if the power to the unit was not turned on.  
Notes:  
1. Press the [OPEN] button to open the FLIP  
DOWN PANEL.  
Note:  
If the FLIP DOWN PANEL will not open far  
enough, open it gently with your hand.  
If the FLIP DOWN PANEL does not open fully,  
gently open with your hand.  
After loading a CD, always close the FLIP DOWN  
PANEL.  
2. Press the [EJECT] button. Remove the disc  
Pausing play  
after it is ejected.  
1. Press the [ ] button to pause play.  
3. Close the FLIP DOWN PANEL.  
Press the center of the DCP to close.  
Notes:  
PAUSE” appears in the display.  
2. To resume CD play, press the [ ] button  
again.  
• Always close the FLIP DOWN PANEL once you  
take out the disc.  
• If a CD (12 cm) is left in the ejected position for  
15 seconds, the CD is automatically reloaded  
(Auto reload).  
• If you force a CD into before auto reloading, this  
can damage the CD.  
Displaying CD titles  
This unit can display title data for CD-text/MP3/  
WMA/AAC disc and user titles input with this  
unit.  
1. Each time you press the [DISP] button to  
change the title display.  
Listening to a disc already loaded in  
the unit  
Press the [SRC] button to select the CD/MP3/  
WMA/AAC mode.  
CD-TEXT disc  
User Track Disc/Artist User ...  
MP3/WMA/AAC disc  
Track Folder Title/Album Artist ➜  
Track ...  
When the unit enters the CD/MP3/WMA/AAC  
mode, play starts automatically.  
If there is no disc loaded, the indication “NO  
DISC” appears in the title display.  
16  
CZ509  
 
CD/MP3/WMA/AAC Operations  
Notes:  
Top function  
The top function resets the CD player to the first  
track of the disc. Press the [BND] button to play  
the first track (track No. 1) on the disc.  
In case of MP3/WMA/AAC, the first track of a  
folder being played will be returned.  
• If the CD playing is not a CD-text CD or no user  
title has been input, “NO TITLE” appears in the  
display.  
• If MP3/WMA/AAC disc is not input TAG, “NO  
TITLE” appears in the display.  
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.  
• Tag displays give priority to V2.3 / 2.2.  
• In the case of album Tags for WMA, the  
information written into the extension header is  
displayed.  
List search function  
1. Press and hold the [BND] button (1 sec.) to  
enter the list search mode. And then the  
track list appears in the display.  
• Only ASCII characters can be displayed in Tags.  
2. Prsee the [ ] or [ ] button to select a  
track.  
Selecting a track  
If you press the [x] or [v] button, the  
Track-up  
track list scroll 5 lines at a time.  
1. Press the [v] button to move ahead to the  
beginning of the next track.  
3. Press the [ ] button to play.  
2. Each time you press the [v] button, the  
track advances ahead to the beginning of the  
next track.  
In case of MP3/WMA/AAC, this function is  
performed in the current folder.  
Note:  
Track-down  
• If no operation is performed for more than 10  
seconds, this mode can be cancel and return to  
the usual mode.  
1. Press the [x] button to move back to the  
beginning of the current track.  
2. Press the [x] button twice to move back to  
the beginning of the previous track.  
Other various play functions  
Scan play  
This function allows you to locate and play the  
first 10 seconds of all the tracks recorded on a  
disc.  
Fast-forward/fast-reverse  
Fast-forward  
1. Press and hold the [v] button (1 sec.).  
Fast-reverse  
1. Press and hold the [x] button (1 sec.).  
For MP3/WMA/AAC discs, it takes some time  
until the start of searching and between tracks. In  
addition, the playing time may have a margin of  
error.  
1. Press the [SCN] button to perform scan play.  
Folder scan play  
This function allows you to locate and play the  
first 10 seconds of the first track of all the folders  
on an MP3/WMA/AAC disc.  
1. Press and hold the [SCN] button (1 sec.) to  
perform folder scan play.  
Folder Select  
Repeat play  
This function allows you to select a folder  
containing MP3/WMA/AAC files and start  
playing from the first track in the folder.  
This function allows you to play the current track  
repeatedly.  
1. Press the [RPT] button to perform repeat  
play.  
1. Press the [ ] or [ ] button.  
Press the [ ] button to move the next  
folder. Press the [ ] button to move the  
previous folder.  
Folder repeat play  
This function allows you to play a track currently  
being played in the MP3/WMA/AAC folder  
repeatedly.  
2. To select a track, press the [x] or [v]  
button.  
1. Press and hold the [RPT] button (1 sec.) to  
perform folder repeat play.  
CZ509  
17  
 
CD/MP3/WMA/AAC Operations  
Random play  
This function allows you to play all tracks  
recorded on a disc in a random order.  
1. Press the [RDM] button to perform random  
play.  
Folder random play  
This function allows you to play all the tracks of  
all the folders recorded on an MP3/WMA/AAC  
disc in a random order.  
1. Press and hold the [RDM] button (1 sec.) to  
perform folder random play.  
To cancel play  
1. Press the operating button previously  
selected.  
The various play mode is canceled and the  
various play off mode appears in the display  
for 2 seconds.  
18  
CZ509  
 
Bluetooth Operations  
The Bluetooth allows you to utilize your car’s  
built-in audio system for wireless mobile phone  
or music handsfree communication.  
Making a call  
There are 4 ways to make outgoing call.  
Direct Number Call  
Outgoing call can be made by entering  
telephone numbers directly via the car stereo.  
Some Bluetooth mobile phones have the audio  
features, and some portable audio players  
support Bluetooth feature.  
Telephone number uses 0, 1, 2, 3, 4, 5, 6, 7, 8,  
9, *, #, and +.  
This system can play audio data stored in a  
Bluetooth audio device.  
1. Press the [BND] button to select “DIAL  
NUMBER”.  
The car stereo with Bluetooth will be able to  
retrieve phonebook contacts, received call,  
dialed call, missed call, incoming calls, outgoing  
call, redial call and listen to music.  
2. Press the [ ] button.  
3. Press the [ ] or [ ] button to select the  
numbers.  
Notes:  
4. Press the [x] or [v] button to input or  
• Do not leave the microphone of Bluetooth  
handsfree in the places with wind passing such  
as air outlet of the air conditioner, etc. This may  
cause a malfunction. In addition, if leave it in the  
places subjected to direct sun, high temperature  
can cause distortion, discoloration which may  
result in a malfunction.  
delete the number.  
5. Press and hold the [ ] button (1 sec.) to call  
the mobile phone No.  
Press the [SOUND] button to end the call.  
Call from Phonebook  
User can search the contact name in the  
phonebook and make call.  
• This system will not operate or may operate  
improperly with some Bluetooth audio players.  
• For detailed information on the playable  
Bluetooth audio players, see our home page:  
• When a audio device is paired, the following  
operations are the same as for CD mode:  
Alternatively, user can call from mobile phone.  
1. Press the [BND] button to select “PHONE  
BOOK”.  
2. Press the [v] button to enter the contact  
name mode (In this case, use the [ ], [  
button to select the desired contact name).  
]
Pause  
Track selection  
Fast-foward  
Fast-reverse  
The titles and the play time can not appear in  
the display.  
3. When the contact name is displayed, press  
the [v] or [x] button to select the contact  
name’s phone number.  
4. Press the [ ] button to call the mobile  
phone No.  
See “CD/MP3/WMA/AAC Operations”  
(page 15) for details.  
Press the [SOUND] button to end the call.  
Answering a call  
1. You can answer an incoming call by pressing  
any button.  
Basic Operations  
Press the [SOUND] button to reject an  
incoming call.  
Select Bluetooth  
Received/Dialled/Missed Call History  
You can search any Received/Dialled/Missed  
Call History.  
1. Press the [SRC] button to switch the source.  
2. You can press and hold the [SOUND] button  
to disconnect the currently connected  
device.  
1. Press the [BND] button to select “HISTORY”.  
2. Press the [v] button to enter the contact  
Switch the display  
Press the [DISP] button to select the display in  
name mode (In this case, use the [ ], [  
button to select the desired contact name).  
]
the following order:  
3. When the contact name is displayed, press  
the [x] or [v] button to select the contact  
BT TELBT AUDIO”  
The connected device name will appear in the  
display.  
name’s phone number.  
4. Press the [ ] button to call the mobile  
phone No.  
CZ509  
19  
 
Bluetooth Operations  
Redial a call  
4-1. Press the [ ] or [ ] button to select  
SEARCH” or “WAIT”.  
You can call a redial phone No.  
1. Press the [BND] button to select “REDIAL”.  
2. Press and hold the [ ] button (1 sec.) to call  
the redial phone No.  
5-1. Press and hold the [ ] button (1 sec.).  
When the “SEARCHING” appears in the  
display, you can press the [ ] button to  
stop search, then the list search appear.  
Press the [SOUND] button to end the call.  
SEARCH” mode: User can search the  
Bluetooth mobile phone or audio device.  
To change Bluetooth adjustment setting  
WAIT” mode: User can search this uint via  
the mobile phone or audio device.  
1. Press and hold the [DISP] button (1 sec.)  
to switch to the Bluetooth adjustment  
selection display.  
2. Press the [x] or [v] button to select  
the “item name”.  
6-1. After the search, press the [ ] or [  
button to select the desired Bluetooth  
mobile phone.  
]
7-1. Press and hold the [ ] button (1 sec.) to  
PAIRINGSELECTDELETE↔  
DISCONNECTADD PHONE BOOK”  
DEL NO. PHONE BOOK↔  
HISTORY DELETE ALLPHONE  
BOOK TYPEMIC GAINRING  
VOLTONE SELNOISE↔  
AUTO ANSAUTO CONPASS  
KEYADDRESSBT NAME↔  
BT FW”  
pair.  
SELECT  
This is a setting for user to select one of the  
paired mobile phones or audio.  
2-1. Select “SELECT”.  
3-1. Press the [ ] button, then the paired  
mobile phones appears in the display.  
4-1. Press the [ ] or [ ] button to choose one  
of the 5 mobile phones.  
3. Press the [ ] or [ ] button to select the  
“desired setting value”.  
5-1. Press and hold the [ ] button (1 sec.) to  
In the case of display blinking “ENT”, you  
can press the [ ] button to adjust the  
setting value.  
After completing settings, press the [DISP]  
button to return to the previous mode.  
connect.  
Connected device will be able to use all the  
functionalities provided.  
DELETE  
This is a setting for user to delete one of the  
paired device from the list.  
PAIRING  
This option is used to perform Bluetooth pairing  
with the mobile phone and audio.  
2-1. Select “DELETE”.  
3-1. Press the [ ] button, then the paired  
mobile phones appears in the display.  
4-1. Press the [ ] or [ ] button to choose one  
of the 5 phones and a audio devices.  
Up to a maximum of 5 mobile phones and a  
audio device can be paired.  
2-1. Select “PAIRING”.  
3-1. Press the [ ] button.  
5-1. Press and hold the [ ] button (1 sec.) to  
delete the paired device.  
Notes:  
• After deleting the device, the phone book and  
the call history records will be deleted too.  
• Deleted paired device will not automatically  
rearrange in the paired device list.  
3-2. Press the [ ] or [ ] button to select  
TELEPHONE” or “AUDIO”, then press the  
[
] button.  
For a no paired device after reset or at the same  
time, when you select “TELEPHONE”, please  
press the [ ] or [ ] button to select the phone  
book type.  
(For details, see the chaperter “PHONE BOOK  
TYPE” (page 21))  
DISCONNECT  
This option is used to disconnect the currently  
connected device.  
3-3. After select the “TELEPHONE”, press the  
2-1. Select “DISCONNECT”.  
3-1. Press and hold the [ ] button (1 sec.) to  
[
] or [ ] button to select “MEMORY 1”  
to “MEMORY 5”, then press and hold the  
disconnect.  
Press and hold the [SOUND] button (2 sec.)  
to disconnect.  
[
] button (1 sec.) to memory.  
20  
CZ509  
 
Bluetooth Operations  
Notes:  
ADD PHONE BOOK  
• If you change the phone book type, all of the  
paired mobile phones’s book data will be  
deleted.  
This option is used to add one of the phone No.  
2-1. Select “ADD PHONE BOOK”.  
3-1. Press the [ ] button (1 sec.), then the  
RECEIVING” appears in the display.  
• The piece number of the phone book’s record  
can be stored in the different memory of the  
phone book type are as follow:  
At the same time the phone No. from the  
paired phone book list is sent out, then there  
is a prompt on the mobile phone if it is  
successful.  
PHONE  
MEMORY MEMORY MEMORY MEMORY MEMORY  
1
2
3
4
5
TYPE  
Some mobile phones cannot transfer the  
phone book to this unit because of the less  
word and the language type. In this time,  
please edit your phone book in other  
language, and transer it once again.  
250  
250  
1
2
3
0 piece  
0 piece  
0 piece  
piece  
piece  
200  
piece  
100  
piece  
100  
piece  
50  
piece  
50  
piece  
100  
piece  
100  
piece  
100  
piece  
100  
piece  
100  
piece  
DEL NO. PHONE BOOK  
This option is used to delete one of or all phone  
No. of the added phone book.  
MIC GAIN  
MIC gain can be set by each paired mobile  
phone device. Each registered device has  
unique MIC gain setting.  
2-1. Select “DEL NO. PHONE BOOK”.  
3-1. Press the [ ] button.  
4-1. Press the [ ] or [ ] button to select  
1 DEL” or “ALL DEL”.  
2-1. Select “MIC GAIN”.  
3-1. Press the [ ] or [ ] button to change the  
MIC gain setting.  
The factory default setting is “3”.  
(Adjustment range: 1 to 5)  
5-1. When you select “1 DEL”, press the [  
]
button, then press the [ ] or [ ] button to  
select one of the desired phone No.  
6-1. Press the [ ] button, then the “DELETE?”  
appears in the display.  
7-1. Press the [ ] button (1 sec.) to delete.  
Note:  
• If you want to transfer or handl this unit, please  
perform “DELETE”,“ADD PHONE BOOK” and  
“DEL NO. PHONE BOOK” function to delete all  
of your personal information.  
RING VOL  
This option is used to change the ringing volume  
by each paired mobile phone device.  
2-1. Select “RING VOL”.  
3-1. Press the [ ] or [ ] button to change the  
ringing volume.  
The factory default setting is “5”.  
(Adjustment range: 1 to 10)  
TONE SEL  
HISTORY DELETE ALL  
The system can ring if the mobile phone cannot  
ring when the Bluetooth connection has been  
established.  
This option is used to delete all of the call records.  
2-1. Select “HISTORY DELETE ALL”.  
3-1. Press the [ ] button, then the  
CONFIRM?” appears in the display.  
4-1. Press the [ ] button (1 sec.), then the  
DELETING” appears in the display, detele  
all of the call records successfully.  
2-1. Press “TONE SEL”.  
3-1. Press the [ ] or [ ] button to select  
INTERNAL” or “AUTO”.  
The unit setting is “AUTO”.  
INTERNAL”: Adjust tone in the car  
bluetooth system.  
PHONE BOOK TYPE  
The unit provide 3 types of phone book which  
are stored in memory.  
AUTO”: Automatic adjustment is enabled  
in the paired mobile phone.  
2-1. Select “PHONE BOOK TYPE”.  
3-1. Press the [ ] button.  
NOISE  
This option is used to set noise volume in the  
car bluetooth system.  
3-2. Press the [ ] or [ ] button to select “1”,  
“2” or “3”, then press the [ ] button to  
store in memory.  
2-1. Press “NOISE”.  
3-1. Press the [ ] or [ ] button to select  
LOW” or “HIGH”.  
The factory default setting is “LOW”.  
CZ509  
21  
 
Bluetooth Operations  
AUTO ANS  
Bluetooth Firmware version  
This will display the Firmware version of the  
Bluetooth.  
This is a setting to determine whether any  
incoming call will be automatically or manually  
answered.  
2-1. Select “BT FW”.  
The factory default setting is “OFF”.  
2-1. Select “AUTO ANS”.  
The Bluetooth Firmware version appears in  
the display.  
3-1. Press the [ ] or [ ] button to select “ON”  
or “OFF”.  
ON: Any incoming call is automatically  
answered in 5 seconds.  
OFF: User needs to manually answer the  
call.  
AUTO CONNECT  
This function allows the Bluetooth to be  
connected automatically with previously  
connected device. Connection can be  
established at any source mode.  
The factory default setting is “OFF”.  
2-1. Select “AUTO CON”.  
3-1. Press the [ ] or [ ] button to select “ON”  
or “OFF”.  
ON: Automatic connection is enabled.  
OFF: Automatic connection is disabled.  
PASS KEY  
This PASS KEY is used during pairing mode. A  
maximum of 10 digits can be changed through  
the car stereo.  
The factory default PASS KEY is “1234”.  
2-1. Select “PASS KEY”.  
3-1. Press the [ ] button.  
4-1. Press the [x] or [v] button to remove  
the cursor.  
5-1. Press the [ ] or [ ] button to select the  
desired digits.  
6-1. Press and hold the [ ] button (2 sec.) to  
store in memory.  
If press the [BND] button, the pass key  
returns to the factory default setting.  
ADDRESS  
This will hold the unique Bluetooth address. The  
address is 12 figures.  
2-1. Select “ADDRESS”.  
The Bluetooth address 6 figures appears in  
the display.  
3-1. Press the [ ] or [ ] button to display.  
Bluetooth Name  
This will display the name of the Bluetooth.  
2-1. Select “BT NAME”.  
The Bluetooth name appears in the display.  
22  
CZ509  
 
Operations Common to Each Mode  
Displaying the settings  
To change adjustment setting  
The number of indicator of this unit decreases,  
you can see the state of current settings at any  
operation mode.  
1. Press and hold the [DISP] button (1 sec.)  
to switch to the adjustment selection  
display.  
2-1. Select “SETTINGS”.  
3-1. Press the [ ] or [ ] button to display the  
state of current settings.  
2. Press the [x] or [v] button to select  
the “item name”.  
When the setting is selected, after 1 second  
the current state will be displayed.  
CLOCKCONTRAST↔  
SETTINGSSCRN SVR↔  
MESSAGE INPUTSCROLL↔  
DIMMERBLINKLED↔  
For example:  
after 1 second,  
A-CANCELSYSTEM CHECK”  
3. Press the [ ] or [ ] button to select the  
desired setting value”.  
Turning the screen saver function on  
or off  
In the case of display blinking “ENT”, you  
can press the [ ] button to adjust the  
setting value.  
After completing settings, press the [DISP]  
button to return to the previous mode.  
This unit is provided with the screen saver  
function which allows you to show various kinds  
of patterns and characters in the operation  
status indication area of the display in a random  
order. You can turn on or off this function. If the  
button operation is performed with the screen  
saver function on, the operation display  
corresponding to the button operation is shown  
for about 30 seconds and the display returns to  
the screen saver display.  
Setting the clock  
2-1. Select “CLOCK”.  
3-1. Press the [ ] button.  
3-2. Press the [x] or [v] button to select the  
hour or the minute.  
3-3. Press the [ ] or [ ] button to set the  
correct time.  
The clock is displayed in 12-hour format.  
3-4. Press the [ ] button to store the time into  
The factory default setting is “ON”.  
2-1. Select “SCRN SVR”.  
3-1. Press the [ ] or [ ] button to select the  
setting.  
Each time you press the [ ] or [  
]
memory.  
button, the setting changes in the following  
Note:  
order:  
• You cannot set the clock when it is displayed  
with only the ignition on. If you drain or remove  
the car’s battery or take out this unit, the clock is  
reset. While setting the clock, if another button or  
operation is selected, the clock set mode is  
canceled.  
MESSAGEOFFON”  
Entering message information  
Message up to 30 characters long can be stored  
in memory and displayed as a type of screen  
saver setting.  
Setting the contrast  
You can adjust the display contrast to match the  
angle of installation of the unit.  
The factory default setting is “10”.  
(Adjustment level: 1 to 16)  
The factory default setting is “WELCOME TO  
CLARION”.  
2-1. Select “MESSAGE INPUT”.  
3-1. Press the [ ] button.  
3-2. Press and hold the [BND] button (1 sec.) to  
2-1. Select “CONTRAST”.  
clear the old message.  
3-1. Press the [ ] or [ ] button to adjust the  
3-3. Press the [x] or [v] button to move the  
cursor.  
contrast.  
CZ509  
23  
 
Operations Common to Each Mode  
3-4. Press the [BND] button to select a  
character type. Each time you press the  
[BND] button, the character type changes  
in the following order:  
Setting the external amplifier  
The factory default setting is “OFF”.  
2-1. Select “A-CANCEL”.  
3-1. Press the [ ] or [ ] button to select “ON”  
or “OFF”.  
Capital letters Numbers Symbols ➜  
Capital letters…  
• ON:  
3-5. Press the [ ] or [ ] button to select the  
Use with connected AMP.  
desired character.  
• OFF:  
Use with inside AMP.  
3-6. Repeat step 3-3 to 3-5 to enter up to 30  
characters for message.  
Performing a system check  
This function allows you to perform a system  
check from the adjust mode when required.  
3-7. Press and hold the [ ] button (2 sec.) to  
store the message in memory.  
Press and hold the [BND] button (1 sec.) to  
cancel the input message. Then press and  
hold the the [ ] button (2 sec.) to store the  
message and the message return to default  
setting.  
2-1. Select “SYSTEM CHECK”.  
3-1. Press and hold the [ ] button (1 sec.).  
SYSTEM CHECK” appears in the display,  
then the unit returns to the previous  
operation mode.  
Setting the method for title scroll  
Set how to scroll in CD-TEXT, MP3/WMA/AAC  
title.  
The factory default setting is “ON”.  
2-1. Select “SCROLL”.  
Entering titles  
Titles up to 10 characters long can be stored in  
memory and displayed for CD, CD changer,  
Radio stations. The number of titles that can be  
entered for each mode are as follows.  
3-1. Press the [ ] or [ ] button to select “ON”  
or “OFF”.  
• ON:  
Mode  
Number of titles  
50 titles  
To scroll automatically.  
CD mode  
Radio mode  
• OFF:  
To scroll just 1 time.  
30 titles  
CD changer mode  
Number of titles  
When you want to see the title again, in the  
title mode, press and hold the [DISP] button  
for 3 seconds or longer to scroll the title.  
DCZ625 connected  
100 titles  
Setting the dimmer control  
You can set the dimmer control “ON” or “OFF”.  
The factory default setting is “ON”.  
2-1. Select “DIMMER”.  
3-1. Press the [ ] or [ ] button to select “ON”  
or “OFF”.  
1. Press the [SRC] button to select the mode  
you want to enter a title (Radio, CD, CD  
changer).  
2. Select and play a CD in the CD changer or  
Radio for which you want to enter the title.  
3. Press and hold the [DISP] button (1 sec.).  
4. Press the [x] or [v] button to select  
TITLE INPUT”.  
Anti-theft indicator  
The red Anti-theft indicator is a function for  
preventing theft. When the ACC is off, this  
indicator blinks.  
The factory default setting is “OFF”.  
2-1. Select “BLINKLED”.  
5. Press the [ ] button.  
The display switches to the title input display.  
6. Press the [x] or [v] button to move the  
cursor.  
3-1. Press the [ ] or [ ] button to select “ON”  
or “OFF”.  
7. Press the [BND] button to select a character  
type. Each time you press the [BND] button,  
the character type changes in the following  
order:  
Capital letters Numbers Symbols ➜  
Capital letters…  
24  
CZ509  
 
Operations Common to Each Mode  
8. Press the [ ] or [ ] button to select the  
desired character.  
9. Repeat steps 6 to 8 to enter up to 10  
characters for the title.  
10.Press and hold the [ ] button (2 sec.) to  
store the title into memory.  
Clearing titles  
1. Select and play a CD in the CD changer or  
tune in to Radio for which you want to clear  
the title.  
2. Press and hold the [DISP] button (1 sec.).  
3. Press the [x] or [v] button to select  
TITLE INPUT”.  
4. Press the [ ] button.  
The display switches to the title input display.  
5. Press and hold the [BND] button (1 sec.).  
All characters in the title disappear.  
6. Press and hold the [ ] button (2 sec.) to  
store the setting.  
AUX function  
This system has an external input jack on the  
front panel so you can listen to sounds and  
music from external devices connected to this  
unit.  
Selecting AUX IN sensitivity  
Make the following settings to select the  
sensitivity when sounds from external devices  
connected to this unit are difficult to hear even  
after adjusting the volume.  
The factory default setting is “MID”.  
1. Press and hold the [DISP] button (1 sec.).  
2. Select AUX SENS”.  
3. Press the [ ] or [ ] button to select  
HIGH”, “MID” or “LOW”.  
Note:  
• When AUX mode is selected, AUX IN sensitivity  
can be set.  
CZ509  
25  
 
7. ACCESSORIES  
USB/MTP Operations  
through a USB hub device are also not  
supported.  
USB memory/MTP device operation  
Note:  
When a USB memory device is composed of  
two or more drives, only one of the drives will  
be detected.  
• The following operations are the same as for CD  
mode:  
Pause  
• USB memory devices with security functions  
cannot be played.  
Track selection  
Fast-forward/fast-backward (Except DRM file)  
Top function  
List search  
Scan play  
• The order in which tracks are recorded may  
differ depending on the USB memory device  
connected (the actual playback order may not  
be the same as that indicated on your  
computer’s display).  
Repeat play  
Random play  
• If you continuously operate folder up/down,  
the play time keeps as “00:00”, and the sound  
is not emitted.  
Folder selection  
See “CD/MP3/WMA/AAC Operations” (page 15-  
17) for details.  
About USB Digital Media Streaming  
About USB memory  
This unit supports USB Digital Media Streaming.  
USB Digital Media Streaming is a function used  
to play music files transmitted using Media  
Transfer Protocol (MTP). This function also  
supports the playback of WMDRM 10 files.  
• USB is an acronym for Universal Serial Bus,  
and refers to an external bus standard  
supporting data transfer rates of 12 Mbps.  
• This unit is compatible with USB 1.1/2.0 with  
maximum data transfer rates of 12 Mbps.  
During USB Digital Media Streaming, the unit  
displays the “MTP” mode.  
Use of USB Digital Media Streaming requires  
the purchase of a supported portable audio  
player. For information regarding supported  
portable audio players, consult your nearest  
Clarion dealer, or visit Clarion’s website.  
• USB memory devices that can be played by  
connecting to the unit’s USB cable are limited  
to those recognized as “USB mass storage  
class devices”; operation is not guaranteed  
with all USB memory devices.  
Devices compatible with “USB Mass Storage  
Class” can be used merely by connecting to  
the host device, without need for special  
drivers or application software.  
CAUTION  
• Consult the manufacturer of your USB  
memory device for information regarding  
whether it is supported by “USB Mass  
Storage Class” standards.  
• Insert and remove a USB memory/MTP  
device only when the device is not being  
accessed. Connecting or disconnecting  
the device at the following times may  
result in the loss of data:  
• Audio files playable on this unit are limited to  
MP3/WMA/AAC files. For details, see the  
section “MP3/WMA/AAC” (page 15).  
Copy-protected WMA/AAC files cannot be  
played on this unit.  
- If the USB memory/MTP device is  
removed or power is disconnected  
during writing to the device.  
• The Podcast files of iTunes Store that stored  
in the USB memory device can not be played.  
Besides, the data that edit through some softs  
such as the Tag edit soft may not be played.  
• To prevent the accidental loss of data, always  
back up important data on your computer.  
- When the device is subjected to static  
electricity or electric noise.  
• Do not leave a USB memory/MTP device  
unattended in an automobile. Exposure to  
direct sunlight or high temperatures may  
cause deformation or other malfunction of  
the USB memory/MTP device.  
• This unit does not support connections to a  
computer. In addition, connections made  
26  
CZ509  
 
USB/MTP Operations  
• Do not turn on vehicle ignition when the  
MTP device is connected, since it may  
result in loss or damage to data on the  
MTP device. Connect the MTP device to  
the USB cable after vehicle ignition is  
turned on.  
To listen to tracks on a connected  
USB memory/MTP device  
1. Press the [SRC] button to switch the source.  
When USB memory/MTP device is selected,  
playback (except DRM files) will begin from  
the location at which playback was  
previously stopped.  
Connecting a USB memory/MTP  
device  
1. Connect the USB memory/MTP device to the  
USB cable.  
When a USB memory/MTP device is  
connected the USB/MTP mode will be  
displayed.  
When a USB memory/MTP device is  
disconnected and then reconnected, playback  
will begin from the beginning of the USB  
memory/MTP device.  
Playback will begin from the first file  
recorded on the device.  
If the device is not recognized, press the  
[SRC] button to switch the source to the  
device.  
When “MTP” mode is selected, AAC files on  
the MTP device cannot be played.  
Always insert the device fully into the  
connector. Incomplete connections may  
cause the device not to be recognized.  
Depending on the number of tracks recorded,  
some amount of time may be required until all  
tracks are read into the unit.  
To stop play  
1. Press the [SRC] button and switch the  
function to a source other than the USB  
memory.  
The order in which tracks are recorded may  
differ depending on the device connected (the  
actual playback order may not be the same as  
that indicated on your computer’s display).  
CAUTION  
Do not remove the USB memory/MTP device  
when the USB/MTP mode is selected, since it  
may result in loss or damage to data on the  
USB memory/MTP device.  
Always backup and save important data on  
your computer.  
2. Remove the USB memory/MTP device from  
the USB cable.  
CZ509  
27  
 
iPod Operations  
This section describes operations when  
connected to an Apple iPod via the USB cable.  
Setting iPod simple mode  
Use this function if you wish to operate through  
your iPod connected to this unit via the USB  
cable.  
The factory default setting is “OFF”.  
1. Press and hold the [DISP] button (1 sec.).  
2. Press [x] or [v] to select “S-CTRL”.  
Notes:  
• See the iPod Owner’s Manual for details  
regarding operation conditions.  
• The unit will not operate, or may operate  
improperly with unsupported versions.  
• For a list of compatible Apple iPod unit with the  
this model, please contact your Clarion dealer or  
3. Press the [ ] button.  
4. Press the [ ] or [ ] button to select “ON”  
• “Made for iPod” means that an electronic  
accessory has been designed to connect  
specifically to iPod and has been certified by the  
developer to meet Apple performance  
standards.  
Apple is not responsible for the operation of this  
device or its compliance with safety and  
regulatory standards.  
or “OFF”.  
ON: Operations can be made through your  
iPod.  
OFF: Operations cannot be made through  
your iPod.  
5. Press and hold the [ ] button (1 sec.) to  
store the setting and return to the previous  
mode.  
iPod and iTunes are trademarks of Apple Inc.,  
registered in the U.S. and other countries.  
Notes:  
• When performing iPod operations using simple  
control mode, make the operations slowly. If  
repetitive operations are performed too quickly,  
unforseen errors may occur.  
Connecting an iPod  
When an iPod is connected to the USB slot,  
“Shuffle” set on the iPod will become as follows:  
• When performing iPod operations using simple  
control mode, please do not operate the iPod  
and the unit at the same time, otherwise there  
may be unexpeted event happened.  
• Some iPod models do not support this function.  
Consult your nearest Clarion dealer or website to  
confirm which models do not support this  
function.  
• “Shuffle (Albums)” play Random play  
• “Shuffle (Songs)” play All random play  
The iPod has two modes, the “Play mode” and  
the “iPod menu mode” for selecting tracks.  
Switch between these modes by pressing the  
[BND] button (1 sec.).  
Note:  
• To connect iPod, please use the USB cable  
attached in iPod.  
Other various play functions  
(in Play mode)  
Notes:  
Select iPod mode  
1. Press the [SRC] button.  
• These functions are not supported when in the  
iPod menu mode.  
Playback will begin from the last file that was  
played on the iPod.  
• The Random function set on the iPod remains the  
same after attachment/detachment of the iPod.  
• The Repeat function on the iPod will be changed  
when you connect/disconnect the iPod to the  
unit.  
Notes:  
• The following operations in Play mode operate  
the same as in CD mode:  
Track selection: [x], [v]  
Repeat play  
Play back one track repeatedly.  
Fast-forward/fast-reverse: [x], [v]  
Pause: [  
]
1. Press the [RPT] button.  
See “CD/MP3/WMA/AAC Operations” (page 15-  
17) for details.  
• After a Podcast file has completed playback, the  
pause display, or the track-end position Play-  
Time display will appear. At that time, select a  
music file once again.  
Random play  
Play all albums within a selected category, in  
random order. (Corresponds to “Shuffle  
(Albums)” command on iPod.)  
1. Press the [RDM] button.  
28  
CZ509  
 
iPod Operations  
Playback will begin from the first track in the  
selected category, and the iPod menu mode  
will be canceled.  
Subfolders may be displayed, depending on  
the category.  
All random play  
Play all tracks within a selected category, in  
random order. (Corresponds to “Shuffle  
(Songs)” command on iPod.)  
1. Press and hold the [RDM] button (1 sec.).  
In this case, use the [ ] and [ ] buttons to  
switch between subfolders, then use the [v]  
button to select the desired subfolder.  
To cancel play  
1. Press the same play button once again.  
Notes:  
When the track name display is showing,  
pressing the [x] button will return to the  
currently playing folder name display.  
• When the repeat play mode is canceled, after  
play all tracks within a selected category,  
playback will begin from the first track in the  
selected category.  
• When playing the last track within a selected  
category in Random mode, if ACC is switched off  
then on again, playback will begin from a  
different track.  
• Though the default setting of an iPod is “All  
Repeat”, the indication on the mode status is not  
displayed.  
• When performing operations using simple control  
mode, do not set the repeat off on the iPod.  
5. Use the [ ] and [ ] buttons to select a  
track within a category.  
iPod menu alphabet search  
This function searches the subfolders for  
desired alphabetical letters.  
1. Press the [BND] button to select the iPod  
menu mode.  
2. Press the [ ] or [ ] button to switch  
between categories.  
3. Press the [v] button.  
Selecting category from the iPod  
menu  
1. Press the [BND] button (1 sec.) to select the  
iPod menu mode.  
Subfolders may be displayed, depending on  
the category. In this case, you can use the  
[
] or [ ] button to switch between  
subfolders and use the [v] button to enter  
the next subfolder layer.  
The iPod menu categories will be displayed.  
Notes:  
• Repeat and Random mode operations are not  
supported when in the iPod menu mode.  
4. Press and hold the [DISP] button (1 sec.).  
5. Press the [ ] or [ ] button to select the  
desired letter to search.  
6. Press the [DISP] button to perform search.  
During search, press the [DISP] button to  
cancel search.  
• In iPod menu mode, if you press the [x]/[v]  
or [ ] / [ ] button fast, playback may not be  
performed.  
2. Press the [ ] or [ ] button to switch  
between categories.  
Selecting category using preset  
memory  
The iPod menu categories alternate in the  
1. Press and hold the [BND] button (1 sec.) to  
select the iPod menu mode.  
following order:  
PLAYLISTSARTISTSALBUMS”  
SONGSGENRES↔  
COMPOSERS”...  
The category can be set as follows in the  
[DIRECT] (1-6) buttons.  
Note:  
[1] : PLAYLISTS  
[2] : ARTISTS  
[3] : ALBUMS  
[4] : SONGS  
The iPod menu mode can be canceled by  
performing one of the following operations:  
• Press the [BND] button.  
• When the category select screen is displayed,  
press the [v] button.  
3. Press the [v] button to select the category.  
4. When the track name display is showing,  
press the [v] button.  
[5] : GENRES  
[6] : COMPOSERS  
2. Press the desired [DIRECT] (1-6) button to  
select the category.  
Subfolders may be displayed, depending on  
the category.  
CZ509  
29  
 
iPod Operations  
In this case, use the [ ] and [ ] buttons to  
switch between subfolders, then use the [v]  
button to select the desired subfolder.  
3. When the track name display is showing,  
press the [v] button.  
Playback will begin from the first track in the  
selected category, and the iPod menu mode  
will be canceled.  
Use the [ ] and [ ] buttons to select a  
track within a category.  
iPod menu list back  
In the iPod menu operation mode:  
If press the [BND] button, it will return to the  
previous subfolder list mode.  
If press and hold the [BND] button (1 sec.), it will  
return to the category list mode.  
About title display  
This unit supports the display of title information  
transmitted from a connected iPod.  
• Character code information is UTF-8;  
displayable characters include English  
alphanumerics, some symbols, and some  
umlaut characters.  
• Unsupported characters will be replaced by  
asterisks (*).  
30  
CZ509  
 
Satellite Radio Operations  
This function is available when a Satellite Radio  
Receiver is connected through the CeNET  
cable.  
Confirming your SIRIUS ID  
1. Press the [x] or [v] button to switch to  
channel 0.  
This unit can control the following satellite radio  
receivers:  
2. Press the [DISP] button until the SIRIUS ID  
appears in the diaplay.  
• XM Satellite Interface Adapter (Mini-Tuner  
Included) : CNP2000UC  
Clarion cable for CNP2000UC : CNPCLA1  
Displaying channel labels  
1. Press the [DISP] button to select the desired  
channel label.  
• SIRIUS Satellite Radio Receiver : SIRCL3  
• SIRIUS Satellite Translator Adapter :  
CLA-SC1 (which needs Sirius universal Tuner  
sold separately.)  
Channel Category Title (Artist) Radio  
text Channel...  
Notes:  
Channel selection  
• When the function is differ depending to the  
connected receiver, they are distinguished by  
the following notations:  
“XM”: for an XM Satellite Radio Receiver  
“SIRIUS”: for a SIRIUS Satellite Radio Receiver  
• XM and the XM logos are trademarks of XM  
Satellite Radio Inc.  
1. Channels are selected with the [x] or  
[v] button.  
For details, see the following operation  
descriptions.  
Note:  
• The audio output is muted and other button  
operations are not accepted during channel  
selection.  
Selecting a Satellite Radio mode  
1. Press the [SRC] button.  
Tuning mode  
There are two channel selection modes: quick  
tuning mode and step tuning mode.  
The system changes to the specified  
Satellite Radio mode.  
Quick tuning  
Selecting a band  
1. Press and hold the [x] or [v] button  
1. Press the [BND] button to select a band.  
This changes the reception band as follows:  
XM: XM1 XM2 XM3 XM1 ...  
SIRIUS: SR1 SR2 SR3 SR1 ...  
(1 sec.).  
Step tuning  
1. Press the [x] or [v] button.  
Information displayed during reception  
The following information is displayed when the  
satellite radio cannot be received normally.  
Recalling a preset station  
A total of 18 satellite radio stations can be  
stored.  
When the receiver is turned on the first time  
or after a reset: “UPDATING”  
XM: 6-XM1, 6-XM2 and 6-XM3  
SIRIUS: 6-SR1, 6-SR2 and 6-SR3  
When a channel is being tuned in (no signal is  
yet received):  
This allows you to store your favorite satellite  
radio stations in memory for later recall.  
XM: “LOADING”, SIRIUS: “LINKING”  
1. Press the [BND] button to select the desired  
band.  
• A channel without a broadcast has been  
selected:  
2. Press the [ ] / [ ] button or [DIRECT]  
button to select the desired preset station.  
XM: “– – – CH”, SIRIUS: “INVALID CH”  
• A channel not covered by your contract:  
XM: “UPDATING”, SIRIUS: “CALL 888↔  
539-SIRI” (alternated)  
CZ509  
31  
 
Satellite Radio Operations  
Notes:  
Preset memory  
• When the name of a channel stored in memory is  
changed by a broadcasting channel, the display  
may show a channel name that differs from the  
stored name.  
• A channel stored in memory may be  
discontinued at the option of the broadcasting  
channel.  
• If no operation is performed for more than 1  
second, category seek tuning can automatically  
tune in a receivable broadcast channel category.  
1. Press the [BND] button to select the desired  
band.  
2. Select the desired channel with quick tuning  
or step tuning.  
3. Press and hold the [DIRECT] button (2 sec.)  
to store the current channel into preset  
memory.  
Receiving stations selected by  
category  
Satellite Radio allows you to select broadcast  
channel category (contents).  
Scan function  
There are two scan modes: the category scan  
mode and the preset scan mode.  
1. Press and hold the [BND] button (1 sec.) to  
During scanning channels are displayed in  
abbreviated form, the display mode cannot be  
switched.  
select the category selection mode.  
It press once again, return to the channel  
selection mode.  
Preset scan (PRESET SCN)  
A preset scan scans the channels (up to 18  
channels) stored in the preset memory about  
every 10 seconds.  
2. Press the [ ] or [ ] button to change the  
category item.  
3. Press the [x] or [v] button to tune in a  
station.  
Notes:  
Press and hold the [ ] button (1 sec.) to  
select the preset scan mode. And start the  
preset scanning.  
• When the category selection mode is entered,  
the category of the last received channel is  
displayed first.  
Category scan (CAT SCN)  
• The category selection mode is canceled when  
no channel with the selected category can be  
found.  
• The [x] or [v] button are not pressed within  
7 seconds, the category selection mode is  
canceled, and resumes to the channel mode.  
In a category scan, broadcast channels in the  
same category as the current channel are  
selected about every 10 seconds.  
Press the [ ] button to select the category  
scan mode. And start the category scanning.  
Note:  
• Category scanning is not available when no  
category is defined for the current channel.  
Presetting a category  
A category can be preset by registering specific  
categories in [DIRECT] buttons 1 to 6 while in  
the SIRIUS mode. Then the desired category  
can be recalled by pressing the corresponding  
[DIRECT] button.  
1. Press and hold the [BND] button (1 sec.) to  
enter the category mode.  
2. Press the [ ] or [ ] button to select a  
category.  
3. Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store the current  
category into preset memory.  
32  
CZ509  
 
CD Changer Operations  
Note:  
Procedure to scroll a title  
Set “SCROLL” to “ON” or “OFF”.  
(The factory default setting is “ON”. Refer to the  
subsection “Setting the method for title scroll” in  
section “Operations Common to Each Mode”.)  
• The following operations are the same as for CD  
mode:  
Pause  
Track selection  
Fast-forward/fast-reverse  
Scan play  
Repeat play  
Random play  
See “CD/MP3/WMA/AAC Operations” (page 15-  
17) for details.  
When set to “ON”  
The title is automatically kept scrolling.  
When set to “OFF”  
To scroll just 1 time.  
When you want to see the title again, in the title  
mode, press and hold the [DISP] button (3 sec.)  
to scroll the title.  
CD changer functions  
When an optional CD changer is connected  
through the CeNET cable, this unit controls all  
CD changer functions. This unit can control a  
total of 2 changers.  
Selecting a CD  
1. Press the [ ] or [ ] button to select the  
desired disc.  
Press the [SRC] button and select the CD  
changer mode to start play. If 2 CD changers  
are connected, press the [SRC] button to select  
the CD changer for play.  
If “NO MAG” appears in the display, insert the  
magazine into the CD changer. “D-CHECK”  
appears in the display while the player loads  
(checks) the magazine.  
If a CD is not loaded in a slot of magazine,  
pressing the [ ] or [ ] button can not work.  
Other various play functions  
Disc scan play  
Disc scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer. This function  
continues automatically until it is cancelled.  
If “NO DISC” appears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
Disc scan play is useful when you want to select a  
desired CD.  
Note:  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
1. Press and hold the [SCN] button (1 sec.).  
Disc repeat play  
After all the tracks on the current disc have been  
played, disc repeat play automatically replays  
the current disc over from the first track. This  
function continues automatically until it is  
cancelled.  
CAUTION  
CD-ROM discs cannot be played from every  
CD changer, it’s depended on the model.  
Displaying CD titles  
1. Press and hold the [RPT] button (1 sec.).  
This unit can display title data for CD-text CDs  
and user titles input with this unit.  
Title data for CD-text CDs can be displayed with  
this unit only when it is connected to DCZ625.  
Disc random play  
The disc random play selects and plays  
individual tracks or discs automatically in no  
particular order. This function continues  
automatically until it is cancelled.  
1. Press the [DISP] button to change the title  
display.  
1. Press and hold the [RDM] button (1 sec.).  
Notes:  
To cancel play  
1. Press the operating button previously  
selected.  
• If the CD playing is not a CD-text CD or no user  
title has been input, “NO TITLE” appears in the  
display.  
• If a CD-text CD is not input its disc title or a track  
title, “NO TITLE” appears in the display.  
CZ509  
33  
 
8. TROUBLESHOOTING  
Problem  
Cause  
Measure  
Power does not  
turn on.  
Fuse is blown.  
Replace with a fuse of the same amperage. If the fuse  
blows again, consult your store of purchase.  
(No sound is  
produced.)  
Incorrect wiring.  
Consult your store of purchase.  
No sound output Power antenna lead is  
1. Turn the unit off.  
when operating  
the unit with  
amplifiers or  
power antenna  
attached.  
shorted to ground or  
2. Remove all wires attached to the power antenna  
lead. Check each wire for a possible short to  
ground using an ohm meter.  
excessive current is required  
for remote-on the amplifiers  
or power antenna.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to the power  
antenna lead one by one. If the amplifiers turn off  
before all wires are attached, use an external relay  
to provide remote-on voltage (excessive current  
required).  
Nothing happens The microprocessor has  
Turn off the power, then  
Reset  
button  
when buttons are malfunctioned due to noise, press the [OPEN] button and  
pressed.  
etc.  
remove the DCP.  
Press the reset button for about  
2 seconds with a thin rod.  
Display is not  
accurate.  
If the RESET button is  
pressed when a disc is  
loaded, please eject the disc  
and load it once again before  
attempting to play it.  
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with  
are dirty. cleaning alcohol.  
No sound heard  
The speaker protection circuit 1. Turn down sound volume. Function can also be  
is operating.  
restored by turning the power off and on again.  
(Speaker volume is reduced automatically when  
the speaker protection circuit operates).  
2. If the sound is muted again, consult our service  
department.  
34  
CZ509  
 
Problem  
Cause  
Measure  
No sound heard  
MP3/WMA/AAC files are  
absent in a disc.  
Write MP3/WMA/AAC files onto the disc properly.  
Files are not recognized as  
Use MP3/WMA/AAC files encoded properly.  
an MP3/WMA/AAC file.  
File system is not correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo or  
APPLE ISO file system.  
Sound skips or is Compact disc is dirty.  
Clean the compact disc with a soft cloth.  
noisy.  
Compact disc is heavily  
Replace with a compact disc with no scratches.  
scratched or warped.  
Sound is cut or  
skipped.  
MP3/WMA/AAC files are not Use MP3/WMA/AAC files encoded properly.  
encoded properly.  
Noise is  
generated or  
noise is mixed  
with sound.  
Sound is bad  
directly after  
power is turned  
on.  
Water droplets may form on Let dry for about 1 hour with the power on.  
the internal lens when the car  
is parked in a humid place.  
Wrong filename  
File system is not correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo or  
APPLE ISO file system.  
No sound heard  
The device contains no MP3/ Record MP3/WMA/AAC files properly to the device.  
WMA/AAC files.  
The files are not proper MP3/ Use only properly encoded MP3/WMA/AAC files.  
WMA/AAC format.  
Connectors are loose.  
Disconnect the device and reconnect securely.  
Check operation of portable music player.  
Some USB portable music  
players may consume current  
that exceeds the USB rating.  
In this case, this unit’s  
overcurrent protection circuit  
operates to stop the music  
playback.  
Sound is  
The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.  
interrupted or has improperly encoded.  
noise.  
The device isn’t  
recognized.  
The device is damaged.  
Disconnect the device and reconnect. If the device is  
still not recognized, try replacing with a different  
device.  
Connectors are loose.  
According to the state of  
operation on the device, the  
communication fault is  
caused.  
Disconnect the device and reconnect.  
Can’t insert the  
device.  
The device has been inserted Try reversing the connection direction of the device  
improperly.  
(usually the brand name surface should be facing  
left).  
The connector is broken.  
Replace with a new device.  
CZ509  
35  
 
9. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
ERROR 2  
Cause  
A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult  
deck and is not ejected. your store of purchase.  
Measure  
ERROR 3  
ERROR 6  
A CD cannot be played due Replace with a non-scratched, non-warped-disc.  
to scratches, etc.  
A CD is loaded upside-down Eject the disc then reload it properly.  
inside the CD deck and does  
not play.  
ERROR 2  
ERROR 3  
A CD inside the CD changer This is a failure of CD changer’s mechanism and  
is not loaded.  
consult your store of purchase.  
A CD inside the CD changer Replace with a non-scratched, non-warped disc.  
cannot be played due to  
scratches, etc.  
ERROR 6  
A CD inside the CD changer Eject the disc then reload it properly.  
cannot be played because it  
is loaded upside-down.  
ERROR 2  
ERROR 3  
The files are not proper MP3/ Use only properly encoded MP3/WMA/AAC files.  
WMA/AAC format.  
The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.  
(USB/MTP mode) improperly encoded.  
CUR ERR  
Overcurrent detection.  
Disconnect the devices and reconnect. If the devices  
are still not recognized, try replacing with a different  
devices.  
HUB ERR  
Do not support the HUB  
devices.  
Do not use the HUB devices.  
If an error display other than the ones described above appears, press the reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
36  
CZ509  
 
10. SPECIFICATIONS  
FM Tuner  
Frequency Range: 87.9 MHz to 107.9 MHz  
Audio  
Maximum Power Output: 200 W (50 W 4 ch)  
Bass Control Action (100 Hz): +14 dB, –14 dB  
Treble Control Action (10 kHz): +14 dB, –14 dB  
Line Output Level (CD 1 kHz): 2 V  
Usable Sensitivity: 11 dBµV  
50dB Quieting Sensitivity: 17 dBµV  
Alternate Channel Selectivity: 60 dB  
Stereo Separation (1 kHz): 30 dB  
Frequency Response ( 3 dB): 30 Hz to 15 kHz  
General  
Power Supply Voltage:  
AM Tuner  
Frequency Range: 530 kHz to 1710 kHz  
14.4 V DC (10.8 to 15.6 V allowable), negative  
ground  
Current Consumption: Less than 15 A  
Speaker Impedance: 4 Ω (4 Ω to 8 Ω allowable)  
Auto Antenna Rated Current: 500 mA or less  
Weight / Source unit: 2.53 lb. (1.14 kg)  
Weight / Remote control unit:  
Usable Sensitivity: 28 dBµV  
CD Player  
System: Compact disc digital audio system  
Usable Discs: Compact disc  
1.41 oz. (40 g) (including battery)  
Frequency Response ( 1 dB): 20 Hz to 20 kHz  
Dynamic Range (1 kHz): 80 dB  
Harmonic Distortion: 0.03%  
Dimensions / Source unit:  
7" (Width) 2" (Height) 6-1/8" (Depth)  
[178 (W) 50 (H) 155 (D) mm]  
Dimensions / Remote control unit:  
Bluetooth  
Specification: Bluetooth Ver. 2.0  
1-3/4" (Width) 4-5/16" (Height) 7/16"  
(Depth)  
Profile:  
[44 (W) 113 (H) 11 (D) mm]  
HFP (Hands-Free Profile)  
OPP (Object Push Profile) Phone Book  
A2DP (Advanced Audio Distribution Profile)  
AVRCP (Audio/Video Remote Control Profile)  
Send/Receive Sensitivity: Class 2  
Power Output :  
22 W RMS x 4 Channels at 4  
and 1 % THD+N  
Signal to Noise Ratio:  
92 dBA (reference: 1 W into 4 )  
Note:  
• Specifications and design are subject to change without notice for further improvement.  
CZ509  
37  
 
11.OTHERS  
WMDRM 10 for devices  
• This product is protected by certain  
intellectual property rights of Microsoft. Use or  
distribution of such technology outside of this  
product is prohibited without a license from  
Microsoft.  
• Content owners use Windows Media digital  
rights management technology (WMDRM) to  
protect their intellectual property, including  
copyrights. This device uses WMDRM  
software to access WMDRM-protected  
content. If the WMDRM software fails to  
protect the content, content owners may ask  
Microsoft to revoke the software’s ability to  
use WMDRM to play or copy protected  
content. Revocation does not affect  
unprotected content. When you download  
licenses for protected content, you agree that  
Microsoft may include a revocation list with  
the licenses. Content owners may require you  
to upgrade WMDRM to access their content.  
If you decline an upgrade, you will not be able  
to access content that requires the upgrade.  
38  
CZ509  
 
Clarion Co., Ltd.  
PE-3155B  
280-8704-00  
All Rights Reserved. Copyright © 2008: Clarion Co., Ltd.  
2008/12  
Printed in China / Imprimé en Chine / Impreso en China  
 

CMA Dishmachines Dishwasher EAH EC User Manual
Cobra Digital Blower BV4000 User Manual
Cobra Electronics Marine RADAR XRS 9940 User Manual
Compaq PDAs Smartphones PC H3700 User Manual
Craftsman Saw 119214 User Manual
Cuisinart Bread Maker CBK 200 User Manual
Cuisinart Waffle Iron WAF 150 SERIES User Manual
Curtis Clock Radio CR1355 User Manual
EVGA Computer Hardware 132 BL E758 User Manual
Frigidaire Oven 318205300 User Manual